Daily Archives: July 2, 2017

How To Make A Jingle Bells Instrument To Accompany Christmas Carols

Fun to make and a great accompaniment to the classic carol Jingle Bells, just shake to the beat. Who would have thought that rubbish and junk could sound so festive?

Al you need to make a jingle bells musical instrument is…
16 metal bottle caps, paint, brass nails, sandpaper, hammer and some scraps of wood.

First paint the out side of the bottle caps a nice metallic colour. Spray paint is quick and easy, but applying paint with a brush is just as good.

When the paint is dry, use a large nail and hammer to make a hole in the centre of each cap. Have the cap sitting face up as it would do on the bottle, that way the rough edges are created on the inside of the ‘bell’.

The bells are fixed to a piece of wood, roughly 2cm by 3cm and 28cm long. Give the wood a good sanding so that it doesn’t have any rough surfaces. You could paint or varnish the ‘handle’ if you wish to.
Working on one side of the handle at a time, attach the capes in pairs with the insides of the caps facing one another. Push a brass nail in the holes of the caps and offer it up to the wood.

Place the first set of bells 5cm away from the end. Don’t hammer the nail in too far into the wood. The bells need to move freely on the nail and clatter together.

The second set should be 8.5cm away from the end.

The third set should be 12cm away from the end.

Now turn the handle over to attach bells to the other side. Use scraps of wood to prop up each end of the handle so that it is clear off the workbench. Otherwise you will spoil the bells that you have already attached.

Add bells in pairs in the same way as you did on the other side, but this time the first set of bells 1.5cm away from the end. Add the other sets of bells so that they are level with the bells on the other side of the handle.

Then turn the handle over to attach the remaining set of bells. Again use scraps of wood to prop up the handle.

And there you have it, a set of jingle bells. Young children should be supervised when playing the jingle bells.

If you find it difficult to obtain bottle caps, you could ask an adult to approach a public house or bar, they have no use of the caps. You could also maybe write to a local brewery requesting some bottle caps. Alternatively look in the winemaking department of Boots or Wilkinsons for new bottle caps.

Howard: teammate with Kobe Not Fun

Houston – Dwight Howard expressed his frustration during his career at the LA Lakers. One is to be a team with Kobe Bryant called Howard not a pleasant thing.

27-year-old center is only just one season with the Lakers before leaving to Houston Rocketrs. In Los Angeles, Howard is expected to add strength to the Lakers actually disappointing.

Howard could not be united with his teammates and coach Mike D’Antoni. As a result, Howard was not uncommon heavily criticized.

Nicks stats in the regular season was worse with an average of 17.1 points per games – the second-worst of his career – and 12.4 rebounds per games, fourth worst in his career.

With Howard, Lakers painstakingly entered into the Western Conference playoff zone. After qualifying was, the Lakers only up to the first round after dilibas San Antonio Spurs without resistance alias 0-4.

“Is it hard to play with Kobe? Yeah, used to be very difficult,” said the former Orlando Magic player was quoted by Fox Sports.

“Me and Kobe, we debated several times. Everybody knows Kobe wants to score and there is some time we scramble to get the ball. And it happens within a team.”

“But playing with Kobe does not affect my decision to join with Houston. I just think Houston offers a better situation for me and my career.”

Rumors of a rift between Howard and Bryant even clearer. Kobe is no longer known memfollow’s former colleagues on Twitter.

How To Get Tack Sharp Photographs – A Digital Photography Tip

Did you ever ask yourself how professional photographers get their photographs so sharp and have you wondered how you can do it yourself? Their images are so crisp, so sharp! If they can do it you must be able to do it to, right? So how can you do it?
A couple of years ago when I just started out with photography I was wondering how to do this. Everybody can take a more or less sharp picture, but to take a extremely sharp photograph takes some knowledge. This extreme level is known as tack sharp. If you take a tack sharp photo then you’ve taken an image with the absolute best sharpness. How do you do this?
A couple factors determine if your photographs are going to be tack or not:

Digital photography tip #1: the use of tripods

Some people don’t really like tripods. They can be quite cumbersome. Tripods can be annoying because they are heavy and if you are taking pictures outside they can hold you back quite a bit.
What they can do, however, is get you to that tack level sharpness. With this level of sharpness there can be absolutely no movement or it will result in a fuzzy image

Digital photography tip #2: The use of timers

Use a timer as much as possible. This will further eliminate any movement that might be caused when you take a picture. Although this will greatly improve the quality of your images, it will slow you down even more.

Digital photography tip #3: Lenses

If you have a good lens then your image will be sharper in most cases. The downside is that good lenses cost a lot of money and if you don’t have a lot of cash to spend this point won’t help you as much. The Digital single-lens reflex cameras of today usually come with a standard lens (probably an 18mm to 55mm). While these are great to start with they aren’t the best when it comes to quality, as it has a lot of moving parts in it and good zoom lenses cost a lot. Don’t let this discourage you though. If your names isn’t Rockefeller and you don’t swim in pools of cash there are other ways to get that absolute clarity.

Digital photography tip #4: Aperture

Two stops down from wide open is when your lens is at it’s sharpest. Take the 18mm 55mm lens for example. When you put the aperture at about f/8 then your photograph is going to be sharper then with an aperture of f/3,5.

Digital photography tip #5: Shutter speed

Shorter shutter speeds reduce the chance of getting any motion blur. If there’s one thing that messes up tack sharp images, it’s motion blur. So what are good speeds? Flowers don’t move a lot, so a shutter speed of 1/250 might be able to do the trick. A car or an athlete on the other hand is going to need a shutter speed of 1/2000 or more. The rule of thumb is: The faster your subject is moving the faster your shutter speed needs to be.

Now you have the knowledge to create super sharp images. The next thing you need to do is going out and try these techniques. The main thing that you need to keep in mind is to reduce motion blur.

Earning Fame As A Bengali Singer In Kolkata

Kolkata is the hub of art and culture of the east. It is renowned in the field of song, art and its mix of different cultures. If you want to earn a name as a Bengali singer in Kolkata, then this is the place to be. In the field of theatre, art, song, dance, Kolkata embraces every person. A person cannot learn to sing theoretically unless and until he or she has a melodious voice with its own unique mode of singing. One must gain knowledge of the various notations, if one wants to be a singer. Songs or ragas are mainly practiced in the mornings and in a fresh mind. Songs are mere writings on a paper which is then adorned by the sweet voice of the singer which brings in life to the song. The vital factors required for a singer is to understand the meaning of the song and then embrace it with emotion to make it soulful.

When it comes to music, every singer has their own exclusive method of singing the song which differentiates them from the other singers. If you take note to any performance of a Bengali singer in Kolkata, you would be easily able to evaluate their different manner and technique which a singer follows. The vital part is to learn and understand the language which would make you a better singer. Language is the only key to become a good Bangla Band in Kolkata A very good grasp of the Bengali language with its grammar affects a lot and also helps the singer to understand the meaning of the song.

Music is highly appreciated by the audience in Kolkata and that has helped the Bengali singer in Kolkata to make money with the help of the musical events. These various events help them to earn money in their profession and assist them for recognition. Nowadays thousands of new singer throng everywhere to get noticed. But hardly a few fulfill their requirement. They have to struggle a lot for recognition and to take part in functions across the city. Arranging venues, date of program are a very elaborate task for the singers. Many have outsourced the management to some other organization who are adept in this field. Singers try for a chance at any television channels for recognition or they even try for radio. Sometimes a talk show in any of the channels is also helpful. They speak about the recent contribution in the music industry. So we see that music industry has come a long way in Kolkata. A release of an audio cassette might be very helpful to earn a name. A Bengali singer in Kolkata can truly spend hours here leaning music and enriching oneself.

Winsor Pilates The New Trend In Fitness

The Pilates, pronounced Puh-LAH-teez, has long been considered as the most effective, unique method of body conditioning that integrates muscle control, proper breathing, flexibility, strength training, and body awareness. Originally developed by a legendary performer and boxer Joseph Pilates, the fitness Pilates Method has gone mainstream. It is now performed by people of all ages and gender, from the Hollywood stars to your next door neighbor.

The fitness Pilates method basically features a series of more than 500 fitness exercises. These are controlled movements that are performed very slowly coupled with an intense concentration, but with little repetitions. The primary aim of these controlled movements is to strengthen and stabilize the so-called powerhouse of the anatomy the core muscles of the abdomen, lower back, and buttocks which enable the rest of the body to move freely.

Winsor Pilates is created by Mari Winsor and is noted for its challenging and fast-paced Maximum Burn to let your Winsor Pilates mat exercise to a higher level. Winsor Pilates is known by many as the Maximun Burn and is intended for both men and women who have undergone the Basic mat exercise by Winsor Pilates itself. To better serve the participants, the Winsor Pilates contain the titles Maximum Burn Workout, Maximum Burn Advanced, Endless Fitness for Beginners Workout, Endless Fitness: Strength and Body Slimming, and Back Workout.

In particular, with Winsor Pilates, the participants are said to attain maximum calorie burn in just 20 minutes. With Winsor Pilates you will get leaner and longer muscles and even get stronger.

In fitness Pilates Method, the first piece of equipment you are likely to encounter is the Universal Reformer. This equipment resembles a single-bed frame with a sliding, padded carriage. Also, it features adjustable springs that regulate tension as well as resistance. There are also cables, bars, pulleys and straps that allow you to push or pull with your hands and feet.

Guided by your instructor, you will start off with the simple movements of the fitness Pilates Method. Gradually, you will be ask to progress to the more advanced exercises. Then, you will start lying down, with your back on the carriage, your shoulders in front of the two supports and your feet placed on a foot bar or plate. From this position, you will perform a series of abdominal or leg strengthening Pilates movements. As you gain strength, youll begin to work with your hands and knees, all the while very slowly and smoothly.

After spending some time on the reformer, your fitness Pilates instructor will introduce you to the other Pilates apparatuses. And, as you improve, the time spent on each exerciser will get faster and faster. Note that in fitness Pilates Method, it is always the quality of your movements that is crucial.

As it is commonly noted, in the Winsor Pilates workout you also need to start each set of Winsor Pilates workout exercises with the basic breathing exercise before you can undergo the much intricate Winsor Pilates workout movements.

Red Light Therapy

While red light therapy has become popular as an effective anti-aging and skin rejuvenation solution, there are still some doubts and questions people have about this new age technology. Here we will answer some of the most frequently asked questions about red light therapy to dispel all such doubts.

What results can I expect from red light anti-aging and skin rejuvenation therapy?

Studies and researches have shown that anti-aging and skin rejuvenation treatments using red light therapy improves the skin tone and its texture, reduces pore size, controls spot pigmentations, reduces the appearance of fine lines and wrinkles as well as promotes healthy looking vibrant skin. Red light treatments stimulate circulation and help to repair elastin fibers thus helping to keep the skin firm. It also promotes improved detoxification and oxygenation thus improving natural skin repair and creating healthy skin. Overall you and your skin will look and feel much younger.

Is red light therapy safe?

Red light therapy is one of the very few non invasive ways of harmlessly and gently removing aging signs. These red light lamps do not emit any ultraviolet rays, are completely pain free and do not require any healing time. Red light therapy makes use of red light lying within the wavelength range of 620 to 700nm. According to the United States Food and Drug Administration (FDA), red light with a wavelength of 633nm is considered as a non significant risk and is safe for the eyes. Invasive procedures for anti-aging treatment such as dermal fillers and injections, microdermabrasion, laser resurfacing and chemical peels can have severe side effects. However, you must consult your physician before going for red light therapy if you suffer from an increased sensitivity to light or have been prescribed photo sensitive medication.

How does red light therapy work?

Red light anti-aging and skin rejuvenation therapy uses red light lamps which emit red light at a wavelength of 633nm. This red light penetrates into the skin where it is readily absorbed because of the high blood and water content in the skin layers. The red light stimulates increased production of collagen and elastin in the skins layer which helps to reverse the aging process of the skin. Laboratory tests and studies have in fact revealed that exposure to certain wavelengths of light can cause skin cells to grow about 150 to 200 percent faster. Also, red light at a wavelength of 633 nm promotes oxygenation, hydration and detoxification of the skin, thus ensuring younger looking skin.

The Popularity Of 8051 Microcontrollers & The Role Of C In Programming Them

The world of technology is abuzz with embedded systems that are basically computers implanted in a number of electronic devices, ranging from appliances to mobile phones. Every embedded system houses a vital component known as a microcontroller. Emphasizing input/output or I/O operations, various microcontrollers act as microprocessors to exert control on electronic devices by rendering essential switching, measuring and communicating with the world.

The year 1970 witnessed the emergence of the first generation of microcontrollers. These microprocessors were 8-bit devices and able to operate a program from internal Read-Only Memory (ROM) or external Electrically Erasable Programmable Read-Only Memory (EEPROM). The microcontroller that tops the popularity chart is Intel 8051. Though it was developed as early as 1980, it is the most popular architecture even today. It is surprising to know that manufacturers such as Atmel, NXP and Silicon Labs still employ the 8051 core for their microcontrollers.

Moving on, a standard 8051 microcontroller comprises components such as a Central Processing Unit (CPU) with a Boolean processor, 2 or 3 16-bit timer/counters, 5 or 6 interrupts, 32 I/O lines (i.e. four 8-bit ports), RAM, ROM/EPROM in some models, and programmable full-duplex serial ports.

The popularity of the 8051 has been kept intact due to its many advantages. The most notable advantage is the manner it controls interrupts. Interrupt routines have t be written in fixed 8-byte areas. As the majority of interrupt routines are or must be short, they can usually conform to the 8-byte area. As might be expected if your interrupt routine is lengthier, you can yet branch to the right routine from inside the 8-byte interrupt area. Another advantage of this microcontroller is the instruction set of 8051 is made optimal for the one-bit processes that are frequently required in real-time and real-world control applications. Its Boolean processor facilitates bit manipulation leading to more effective programs that require handling binary input and output situations implicit in digital-control.

Programming a microcontroller like 8051 or 8052 can be carried out using BASIC, C or Pascal. Each of these languages has their own positive and negative points. However, C language for microcontrollers is preferred by many. It is a compiled language that runs fast all the time. As it is a standardized language, it can easily be ported to various compilers or desired devices. There are plenty of C compilers available in the market. But, Keil IDE/compiler is very much in demand. This programming language also boasts numerous built-in functions depending upon the compiler. Last but not least, C for microcontrollers is applied in a large number of varying industries.

The difficulty in learning this language initially is the only disadvantage you may encounter. But, you can overcome this problem by going for an online embedded C tutorial on an 8051 or 8052.

Ravin J Ganatra, Guilty Of Being A Fine Actor

Television and film actor; Ravin is experienced, has been commended by his peers and critics alike, and has been in fine form both on film and stage! Add the fact that he has starred in a major motion picture, his credentials speak for themselves.
From soaps, TV dramas to stage plays and films, the actor has a presence that precedes itself. Coronation Street, The Bill, Torchwood, East Enders to The Entrapment, Prime Suspect and recently The Infidel, he is an accomplished and polished actor.
He also appears on stage alongside some great names, he is well respected by his fellow actors, by directors, by producers, whenever an actor is required of a high calibre with versatility then this is the person they call. He is a diverse actor who can play all types of roles, he brings versatility and flexibility with a can do attitude.
This actor is always looking to improve himself, he works very hard in his craft, and he strives for perfection and dedicates himself to his ability. He also produces programmes for television and cinema through his production company Guriji Productions, an independent production company committed to producing works of a high calibre. Through Guruji Productions he is able to express his attitude and desires and bring them to screen. He manages to transcend his acting ability behind the camera and produce extremely interesting and relevant documentaries and films.
This actor brings professionalism, experience and ability like no other to every role he portrays. Ravin is an avid fan of theatre.
He has just finished work on a theatre production title Behud (Beyond Belief), playing an aggrieved community leader. He was excellent; many who watched the play were in awe of his performance, some even suggesting that an award is long over due.
Behud had its world premier at Coventrys Belgrade Theatre before transferring to Londons Soho Theatre, where it ran from April 15 (previews from April 13) to May 8, 2010.
We salute this actor; we look forward to his plays, his films and to be able to divulge ourselves in his ability.

Ravin is actively seeking film, theatre and production roles and is always looking for roles that inspire both himself and his audience…..

Mohali boy debuts at Lakme Fashion Week

It is well past sun down but the day has just begun for this 27-year-old designer. “I have waited so long for this moment,” admits Vipin Batra as he scurries about getting his tall, leggy models to try out his designs. Batra opened the Generation Next designer category on the first day of the Lakme Fashion Week Summer/Resort 2010 in Mumbai last weekend. “I always dreamt of arriving with my own label,” says Batra. His phone hasn’t stopped ringing ever since March 5, when his alma mater Northern India Institute of Fashion Technology (NIIFT) in Mohali got to know about his debut.

Batra, who hails from Rajasthan, is from the 2004-2006 batch of Knitwear Design Technology. “All that I know of fashion, its techniques and philosophy is what I learnt at NIIFT, Mohali,” he says. His teachers haven’t forgotten him either. “Batra was very hard working and I am glad it all paid off well for him,” says NIIFT Mohali’s director Vijay Sharma.

Designer duo Hemant Lalwani and Nandita Rajpurani, incidentally, are two other successful designers who trained at the institute. About a year ago, he came out with his own label V for Vipin Batra. He took his new line to the Bangalore Fashion Week held in February this year. For LFW, Batra rolled out his Swirls of Life. “I like to experiment with different yarns by creating new textures. For Swirls of Life, I was inspired by the planets and the cosmos,” he says, whose line-up included snug-fitting gowns made of graphic-jacquard knitwear technique. With just Swarovskis for embellishment, Batra played up the line with lots of colour.

The response, so far, has been good. “I have got invitations for Hong Kong Fashion Week as well London Fashion Week. I am thrilled,” he sums up. Vipin Batra has been trying to make inroads into Lakme Fashion Week for over three years and finally made his debut this season.

Vipin says, “I was so excited to get this opportunity to show my work to a larger audience with Lakm Fashion Week – Summer/Resort 2010. I am not one to get afraid of competition, rather I take it as a challenge; it gives me even more strength to push my creativity to the next level. Swirls of Light is the main source of inspiration and one person who I would Love to dress in my signature style is my idol, John Gilliano.”

The author is an entertainment news editor and works for many websites related to event, bollywood, music, movie, concerts and theater. Visit one more interesting article of author: Mukul Dongre or visit:

Raising Kids Right Busting Heart-Unhealthy Habits

Changing bad habits now could save your child’s life in the future.

Childhood obesity rates are higher than ever in the United States. Learning poor eating habits from their parents, today’s children are eating high-fat foods with minimal fruits and vegetables. They’re also spending less time outdoors and more time playing video games and watching movies – a combination that leads to weight issues at a much younger age.

On top of the self-esteem issues overweight youth face, a high saturated fat and cholesterol intake means that kids are at a higher risk of heart attack, stroke, and other health problems later in life. Though it may be frightening to parents to learn that their children are among the first generation estimated not to outlive their parents, these startling numbers can be changed with healthy diet and exercise choices. Changing kids’ habits starts with changing the habits of the people who taught them in the first place: their parents.

It’s important for parents to influence their children in a positive way by spending lots of time outdoors doing physical activities and eating a healthy diet rich in whole foods. Eat minimal desserts and make activities fun by spending time as a family. This teaches children a healthy respect for food and builds a strong family foundation. Teach children the dangers of smoking and high alcohol consumption, which also raises risk for heart disease and stroke later in life.

It’s important to begin making these changes as early as possible. New studies have shown that making lifestyle changes in high-risk children can actually reduce risk later in life – an exciting finding for families with a family history of heart disease or stroke who worry about their children contracting the disease later in life. The cardiology centers offer advanced diagnostic testing like lipid profiles and cardiac MRI screenings – allowing patients to know their heart disease risk and make the necessary changes for their families. Surgical center, perform minimally invasive cardiac surgery and heart valve replacement surgery. Heart valve replacement surgery cost and heart valve replacement surgery recovery times continue to be top attraction of this medical center for American families. Keeping kids healthy in today’s environment is no easy task, but it helps to build a strong family environment of shared healthy habits.

About Mount Sinai Medical Center Heart Institute

Mount Sinai Medical Center Heart Institute – a partner of New York’s prestigious Columbia University – specializes in minimally invasive cardiac surgery and heart valve replacement surgery. They staff over forty leading cardiologists and utilize a wide variety of diagnostic techniques and procedures for excellent patient care.